 |
|
|
|
|
| |
2 BANK |
|
|
|
|
| |
The DOUBLE "Select" System is equivalent to bouncing a 575 watt HMI off a white poly board. It consists of a two lamp fixture operated by a remote ballast. The Select Ballast is flicker free at any camera speed or shutter angle with controls to power two lamps or one at high-output or standard-output settings.
The same ballast will power your choice of 4ft, 2ft, or 15-inch fixtures. The DOUBLE "Select" System serves well as an edge light, or above the camera as an ‘obie’ light. When lighting close-ups of a face, the 4ft system provides a very flattering soft light that seemingly "wraps around" the face. The extended 6-inch barndoors and the louvers allow for a greater degree of light control.
The DOUBLE system is a multi-purpose, everyday light. By combining two DOUBLES, you have the light output of a 4BANK. By powering only one lamp in the DOUBLE fixture, the output equals a SINGLE "Select" System. Like the 4BANK and SINGLE systems, the DOUBLE's wiring harness allows the lamps to be operated outside the fixture. This fixture frees up the lamps to be used for custom installations. To change the colour temperature, select the appropriate lamp. Size: KINO FLO 2 Bank,4ft DOUBLE = 1308x191x89mm
KINO FLO 2 Bank,2t DOUBLE = 679x191x89mm
Weight: KINO FLO 2 Bank,4ft DOUBLE= 3.18kg
KINO FLO 2 Bank,2t DOUBLE = 1.81kg
Ballasts: 2 Bank
Suggested Stands: MATTHEWS C
Bulb Type: KF55(DAYLIGHT) or KF32(TUNGSTEN)
Colour Temp: The KF55 is a broad-spectrum daylight lamp with a colour temperature of 5500 Kelvin and a CRI of 95. The KF55 mixes well with ambient daylight, HMI, or Xenon light sources without colour correction. |
|
| |
|
|
|
|
|
Carbon Arc
